UHU Shoe and leather glue

foams, textiles, felt, cork.
The adhesive surfaces must be clean, dry and free of oil, grease and dust. UHU shoe and leather repair adhesive should be processed at a temperature of approx. +15°C to +30°C. Lower temperatures and high humidity prolong the flash-off time and make good adhesion more difficult. Apply UHU shoe and leather repair adhesive evenly to both parts to be bonded using a toothed trowel or short bristled brush. Apply several coats to highly absorbent materials (leather, fabric, felt, etc.) until a highly visible adhesive film remains. Do not join parts together immediately, but leave them open until the applied adhesive layer is dry to the touch. (Depending on temperature after approx. 10 - 15 min). Then place the parts exactly on top of each other and press them together briefly but firmly. A correction is no longer possible. For the adhesive strength, the level of the pressing pressure is decisive and not the duration. As pressing time seconds are sufficient. After correct gluing, the parts can be further processed immediately. Butanone (MEK), ethyl acetate and nitro thinner are suitable for removing adhesive residues and cleaning the devices.